![](../../../img/23/ACB04276AB00ENG.png)
|
If a malfunction occurs in the CVT
system, any of "R", "N", "D", "Ds", "L", "B", "S" or "A" on
the selector lever position indicator in the
multi-information display will be flashed (one flash per two
seconds).
note |
- The selector lever position indicator
"P" does not flash when a malfunction
occurs in the CVT system.
- When the system is normal, the selector
lever position indicator "A" is not
displayed. Only when a malfunction
occurs in the inhibitor switch, the
indicator will flash.
|
If the selector lever position indicator flashes
rapidly (one flash per one second), the CVT fluid
temperature is too high. [Flashes when the fluid
temperature is approximately 137°C or higher, and
stops flashing (remains illuminated) automatically when the
fluid temperature drops below approximately
132°C.]
note |
These CVT fluid temperatures,
at which the indicator flashes or remains
illuminated, are indication values on the
M.U.T.-III.
|
|
|
Use M.U.T.-III to read the
diagnosis code (Refer to GROUP 00 - How to Use
Troubleshooting/Inspection Service Points ).
|
|
Use M.U.T.-III to erase the
diagnosis code (Refer to GROUP 00 - How to Use
Troubleshooting/Inspection Service Points ).
|