Code No. U1197: Coding data unavailable
Diagnostic function
CVT-ECU checks that the coding information is normal.
JUDGEMENT CRITERIA
When the CVT-ECU cannot receive "programmed" signal.
PROBABLE CAUSES
- Malfunction of CAN bus line
- Variant coding for ETACS-ECU has not been implemented.
- Malfunction of ETACS-ECU
- Malfunction of CVT-ECU
|
STEP 1. M.U.T.-III CAN bus diagnostics
|
|
Use the M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Go to Step 2.
|
|
|
|
Repair the CAN bus lines. (Refer to GROUP 54C - Troubleshooting .)
|
|
|
|
STEP 2. Use M.U.T.-III to confirm a diagnosis code of other systems.
|
|
Check if a coding-related diagnosis code is stored in the ETACS-ECU.
|
|
Q.
Is the diagnosis code stored?
|
|
Diagnose the ETACS-ECU. (Refer to GROUP 54A - Troubleshooting )
|
|
|
|
Go to Step 3.
|
|
|
|
STEP 3. Diagnosis code recheck
|
|
Check again if the diagnosis code is stored in the CVT-ECU.
|
|
(1)Erase the diagnosis code.
|
|
(2)Turn the ignition switch from the LOCK (OFF) position to the ON position.
|
|
(3)Check if the diagnosis code is stored.
|
|
Q.
Is the diagnosis code stored?
|
|
Replace the CVT-ECU.
|
|
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunctions .).
|
|
|