|
BRAKE PEDAL HEIGHT |
1.Turn up the floor carpet
under the brake pedal. |
2.Remove the stop lamp
switch (Refer to ![]() |
BRAKE PEDAL FREE PLAY |
![]() |
1.Turn the ignition switch
to the LOCK (OFF) position, depress the brake pedal two or
three
times. After eliminating the vacuum in the brake booster,
press the pedal down by hand, and
confirm that the amount of movement before resistance is met
(free play) is within the standard
value range. Standard value (B): 3 - 8 mm 2.If the brake pedal play is not within the standard value, check the following, and adjust or replace if necessary:
|
CLEARANCE BETWEEN BRAKE PEDAL AND FLOOR BOARD |
1.Turn up the carpet, etc.
under the brake pedal. |
![]() |
2.Start the engine, depress
the brake pedal with approximately 500 N of force, and
measure
the clearance between the brake pedal and the floor
board. <Vehicles for Thailand> Standard value (C): 73 mm or more <Except vehicles for Thailand> Standard value (C): 75 mm or more <LHD> 80 mm or more <RHD> 3.If the clearance between the brake pedal and the floor is not within the standard value, check the brake lines for air-lock, the disc brake pad thickness or the drum brake lining thickness, and the parking brake for dragging. Adjust or replace defective part(s) if necessary. 4.Return the carpet etc. to its original position. |