REMOVAL AND INSTALLATION


caution The master cylinder cannot be disassembled. Be careful not to remove the primary piston.
The removal service points and installation service points are the same as before.
Pre-removal Operation
  • Brake Fluid Draining.
  • Air Cleaner Assembly Removal (Refer to GROUP 15 - Air Cleaner).

 Post-installation Operation
  • Air Cleaner Assembly Installation (Refer to GROUP 15 - Air Cleaner).
  • Brake Fluid Supplying and Air Bleeding.
  • Brake Pedal Adjustment.




Removal steps


1.
 Brake fluid level switch connector


2.
 Brake pipe connection


3.
 Pin


4.
 Reservoir cap


5.
 Reservoir filter


6.
 Reservoir assembly


7.
 Reservoir seal


8.
 Brake fluid level switch


9.
 Brake master cylinder assembly


10.
 O-ring


11.
 Brake vacuum sensor connector


12.
 Brake vacuum sensor


13.
 Grommet


14.
 Hose clip


15.
 Clip

>>A<<
 16.
 Vacuum hose (with built-in check valve)


17.
 Hose clip


18.
 Vacuum hose


19.
 Cable band


20.
 Vacuum pipe


21.
 Snap pin


22.
 Clevis pin
<<A>>
23.
 Brake booster assembly


24.
 Sealer