REMOVAL AND INSTALLATION


caution The master cylinder cannot be disassembled. Be careful not to remove the primary piston.
The removal service points and installation service points are the same as before.
Pre-removal Operation
  • Brake Fluid Draining.
  • Battery Removal (Refer to GROUP 54A - Battery).

 Post-installation Operation
  • Battery Installation (Refer to GROUP 54A - Battery).
  • Brake Fluid Supplying and Air Bleeding.
  • Brake Pedal Adjustment.

<Vehicles with ASC>

Removal steps


1.
 Brake fluid level switch connector


2.
 Brake pipe connection


3.
 Pin


4.
 Reservoir cap


5.
 Reservoir filter


6.
 Reservoir assembly


7.
 Reservoir seal


8.
 Brake fluid level switch


9.
 Brake master cylinder assembly


10.
 O-ring


11.
 Brake vacuum sensor connector


12.
 Brake vacuum sensor


13.
 Grommet


14.
 Hose clip


15.
 Clip

>>A<<
 16.
 Vacuum hose (with built-in check valve)


17.
 Hose clip


18.
 Vacuum hose


19.
 Cable band


20.
 Vacuum pipe


21.
 Snap pin


22.
 Clevis pin
<<A>>
23.
 Brake booster assembly


24.
 Sealer