Code No.U1197:
Variant coding data unavailable
caution |
- If there is any
problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis,
diagnose the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table
).
- Before replacing the ECU, ensure that the communication circuit is normal.
- When diagnosis code U1197 is set in ABS-ECU, the diagnosis code may also be set
in ETACS-ECU. When the diagnosis code is set in ETACS-ECU, carry out the diagnosis of the diagnosis
code for ETACS-ECU first.
|
OPERATION
ABS-ECU receives the vehicle information stored in the ETACS-ECU via CAN bus lines.
DIAGNOSIS CODE SET CONDITIONS
ABS-ECU communicates with ETACS-ECU via CAN bus lines. This diagnosis code is set when there
is difference between the vehicle information from the ETACS-ECU and the vehicle information stored
in the ABS-ECU.
PROBABLE CAUSES
- Malfunction of ETACS-ECU
- ETACS-ECUs have been interchanged between two vehicles.
- ABS-ECU malfunction
- External noise interference
- ABS-ECUs have been interchanged between two vehicles.
|
STEP 1. M.U.T.-III CAN bus diagnostics
|
|
Use M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Go to Step 3.
|
|
|
|
Repair the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnosis table ).
On completion, go to Step 2.
|
|
|
|
STEP 2. Diagnosis code recheck after resetting CAN bus lines
|
|
(1)Turn the ignition switch from the "LOCK" (OFF) position to the "ON" position.
|
|
(2)Erase the diagnosis code.
|
|
(3)Turn the ignition switch from the "ON" position to the "LOCK" (OFF) position.
|
|
Q.
Is diagnosis code No. U1197 set?
|
|
Go to Step 3.
|
|
|
|
The procedure is complete.
|
|
|
|
STEP 3. M.U.T.-III other system diagnosis code
|
|
Use M.U.T.-III to check that other diagnosis code is set in the ETACS-ECU.
|
|
Q.
Is any diagnosis code set?
|
|
Perform troubleshooting for ETACS-ECU (Refer to GROUP 54A - ETACS, Troubleshooting ).
Then go to Step 6.
|
|
|
|
Go to Step 4.
|
|
|
|
STEP 4. Check ETACS coding data
|
|
Refer to GROUP 00 - Coding List <Vehicles
for GENERAL EXPORT>, <Vehicles for GCC>, <Vehicles
for THAILAND>.
|
|
Q.
Is the check result normal?
|
|
Go to Step 5.
|
|
|
|
Replace ETACS-ECU (Refer to GROUP 54A - ETACS, ETACS-ECU ).
Then go to Step 6.
|
|
|
|
STEP 5. Check part number of ABS-ECU
|
|
Check the part number of ABS-ECU.
|
|
Q.
Is the check result normal?
|
|
Go to Step 6.
|
|
|
|
Replace the hydraulic unit [(integrated with ABS-ECU) Refer to ].
Then go to Step 7.
|
|
|
|
STEP 6. Check whether the diagnosis code is set again.
|
|
(1)Turn the ignition switch from the "LOCK" (OFF) position to the "ON" position.
|
|
(2)Erase the diagnosis code.
|
|
(3)Turn the ignition switch from the "ON" position to the "LOCK" (OFF) position.
|
|
Q.
Is diagnosis code No.U1197 set?
|
|
Replace the hydraulic unit [(integrated with ABS-ECU) Refer to ].
Then go to Step 7.
|
|
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction ).
|
|
|
|
STEP 7. Check whether the diagnosis code is set again.
|
|
(1)Turn the ignition switch from the "LOCK" (OFF) position to the "ON" position.
|
|
(2)Erase the diagnosis code.
|
|
(3)Turn the ignition switch from the "ON" position to the "LOCK" (OFF) position.
|
|
Q.
Is diagnosis code No.U1197 set?
|
|
Return to Step 1.
|
|
|
|
This diagnosis is complete.
|
|
|