Code No. C1392:
INCOMP. learn (Longitudinal G)
caution |
- If there is any
problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis,
diagnose the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table
).
- Whenever ECU is replaced, ensure that the CAN bus lines are normal.
- When the hydraulic unit (integrated with ASC-ECU) is replaced, always carry out
the calibration of the G and yaw rate sensor and the steering wheel sensor (Refer to
and ).
|
OPERATION
The ASC-ECU monitors the integrated G and yaw rate sensor.
DIAGNOSIS CODE SET CONDITIONS
The ASC-ECU will set a diagnosis code when the G and yaw rate sensor has not been calibrated.
PROBABLE CAUSES
- The G and yaw rate sensor calibration not executed
- Malfunction of the hydraulic unit assembly (integrated with ASC-ECU).
|
STEP 1. M.U.T.-III CAN bus diagnosis.
|
|
Use the M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Go to Step 3.
|
|
|
|
Repair the CAN bus line. (Refer to GROUP 54C - Troubleshooting ).
On completion, go to Step 2.
|
|
|
|
STEP 2. Diagnosis code recheck after resetting CAN bus lines.
|
|
Q.
Is diagnosis code No. C1392 set?
|
|
Go to Step 3.
|
|
|
|
This diagnosis is complete.
|
|
|
|
STEP 3. G and yaw rate sensor calibration.
|
|
Perform calibration of G and yaw rate sensor. (Refer to .)
|
|
Q.
Is the check result normal?
|
|
Go to Step 4.
|
|
|
|
Calibrate the G and yaw rate sensor (Refer to ). Then
go to Step 5.
|
|
|
|
STEP 4. Check whether the diagnosis code is set again.
|
|
(1)Erase the set diagnosis code.
|
|
(2)Ignition switch: "LOCK" (OFF) to "ON"
|
|
Q.
Is diagnosis code No. C1392 set?
|
|
Replace the hydraulic unit assembly (integrated with ASC-ECU) (Refer to ).
Then go to Step 5.
|
|
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction).
|
|
|
|
STEP 5. Check whether the diagnosis code is set again.
|
|
(1)Erase the set diagnosis code.
|
|
(2)Ignition switch: "LOCK" (OFF) to "ON"
|
|
Q.
Is diagnosis code No. C1392 set?
|
|
Return to Step 3.
|
|
|
|
This diagnosis is complete.
|
|
|