|
Use the M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Repair the CAN bus line. (Refer to GROUP 54C - Troubleshooting ).
Then go to Step 6.
|
|
|
|
Use M.U.T.-III to check the diagnosis code for the ASC system.
|
|
Q.
Is the diagnosis code stored?
|
|
Carry out the diagnosis for the diagnosis code (Refer to ).
Then go to Step 6.
|
|
|
|
Q.
Is the check result normal?
|
|
Diagnose the power supply circuit of the ASC-ECU (Refer to ). Then
go to Step 6.
|
|
|
|
Use M.U.T.-III to check if the diagnosis code is set in the combination meter system.
|
|
Q.
Is the diagnosis code stored?
|
|
Perform troubleshooting for the combination meter. (Refer to GROUP 54A - Combination
Meter, Troubleshooting ). Then go to Step 6.
|
|
|
|
Q.
Does the ASC indicator lamp illuminates and goes out normally?
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How
to Cope with Intermittent Malfunction).
|
|
|
|
Replace the hydraulic unit assembly (integrated with ASC-ECU) (Refer to ). Then
go to Step 6.
|
|
|
|
Q.
Does the ASC indicator lamp illuminates and goes out normally?
|
|
This diagnosis is complete.
|
|
|