REMOVAL AND INSTALLATION


caution Do not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which have grease on them.
Pre-removal OperationFloor Console Assembly Removal (Refer to GROUP 52A, Floor Console ).
 Post-installation Operation
  • Parking Brake Lever Stroke Adjustment (Refer to ).
  • Floor Console Assembly Installation (Refer to GROUP 52A, Floor Console Assembly ).




Removal steps


·
 Release the parking brake lever.


·
 Loosen the self-locking nut.


1.
 Parking brake switch connector connection

>>A<<
 2.
 Parking brake rear cable connection


3.
 Parking brake lever assembly


4.
 Parking brake switch


5.
 Self-locking nut

INSTALLATION SERVICE POINT

>>A<< PARKING BRAKE REAR CABLE INSTALLATION
caution Check that the equalizer and the rear parking brake cable are connected correctly. If the parking brake is applied with the equaliser and the rear parking brake cable connected improperly, the equaliser may be damaged.

Connect the rear parking brake cable to the equaliser as shown in the figure.