|
Check that a door window glass
operates smoothly and moves along the door window glass
runchannel when the window glass is fully raised and
lowered. If there is a problem, adjust the
window glass by the following procedures:
|
|
1.Remove a door trim
assembly (Refer to GROUP 52A -
Door Trim ).
|
|
2.Remove a waterproof film
(Refer to ).
|
|
3.Remove the power window
switch from the removed door trim assembly, and connect it
to the door side connector.
|
![](../../../img/42/ACB03851AB00ENG.png)
![](../../../img/42/ACB03852AB00ENG.png)
|
4.Set the channel guide
mounting bolts to the adjusting hole. 5.Raise the
window glass with the power window switch to check that the
window glass
to door clearance is even. If there is a problem, loosen the
channel guide mounting bolts to
adjust tilting up/down of the glass.
|