![](../../../img/42/ACB04685AC00ENG.png)
|
1.Remove the power window
fuse to check that it is normal, and connect a multimeter as
shown
in the illustration. 2.Raise a door window glass
with the power window switch to measure the current during
operation. Standard value: 7 A or less
[Power supply voltage 14.5 ± 0.5V
at 25°C]
note |
If the power supply voltage
does not meet the standard value, check and
repair the alternator
and the battery. Then carry out this check
again.
|
3.If the value is outside the standard value,
adjust the door window glass (Refer to ). 4.The
fuse for power window is removed, carry out the learning
procedures of the power
window fully closed position (Refer to ).
|