INSPECTION


POWER WINDOW MAIN SWITCH CONTINUITY CHECK <Vehicles with safety system>


<FRONT PASSENGER’S SWITCH (LHD)>
Switch position
 Tester connection
 Specified condition
UP
 1 - 8*, 2 - 10
 Continuity exists (2 Ω or less)
OFF
 1 - 8*, 2 - 8*
DOWN
 1 - 10, 2 - 8*
note *: Set the window lock switch to UNLOCK position.

<FRONT PASSENGER’S SWITCH (RHD)>
Switch position
 Tester connection
 Specified condition
UP
 3 - 7*, 4 - 5
 Continuity exists (2 Ω or less)
OFF
 3 - 7*, 4 - 7*
DOWN
 3 - 5, 4 - 7*
note *: Set the window lock switch to UNLOCK position.

<REAR PASSENGER’S LEFT SWITCH (LHD)>
Switch position
 Tester connection
 Specified condition
UP
 8* - 15, 10 - 16
 Continuity exists (2 Ω or less)
OFF
 8* - 15, 8* - 16
DOWN
 8* - 16, 10 - 15
note *: Set the window lock switch to UNLOCK position.

<REAR PASSENGER’S LEFT SWITCH (RHD)>
Switch position
 Tester connection
 Specified condition
UP
 5 - 16, 7* - 15
 Continuity exists (2 Ω or less)
OFF
 7* - 15, 7* - 16
DOWN
 5 - 15, 7* - 16
note *: Set the window lock switch to UNLOCK position.

<REAR PASSENGER’S RIGHT SWITCH (LHD)>
Switch position
 Tester connection
 Specified condition
UP
 8* - 11, 10 - 12
 Continuity exists (2 Ω or less)
OFF
 8* - 11, 8* - 12
DOWN
 8* - 12, 10 - 11
note *: Set the window lock switch to UNLOCK position.

<REAR PASSENGER’S RIGHT SWITCH (RHD)>
Switch position
 Tester connection
 Specified condition
UP
 5 - 12, 7* - 11
 Continuity exists (2 Ω or less)
OFF
 7* - 11, 7* - 12
DOWN
 5 - 11, 7* - 12
note *: Set the window lock switch to UNLOCK position.

POWER WINDOW SUB SWITCH CONTINUITY CHECK <Vehicles with safety system>

Switch position
 Tester connection
 Specified condition
UP
 4 - 5, 6 - 7
 Continuity exists (2 Ω or less)
OFF
 4 - 5, 7 - 8
DOWN
 4 - 6, 7 - 8

POWER WINDOW MAIN SWITCH CONTINUITY CHECK <Vehicles without safety system (Vehicles with driver’s side auto down mechanism)>


<DRIVER’S SWITCH (LHD)>
Switch position
 Battery connection
 Tester connection
 Specified condition
UP
  • Connect terminal No.8 and the negative battery terminal.
  • Connect terminal No.10 and the positive battery terminal.

 4 - 8
 12 V
OFF
 4 - 8, 3 - 8
 1 V or less
DOWN
 3 - 8
 12 V

<DRIVER’S SWITCH (RHD)>
Switch position
 Battery connection
 Tester connection
 Specified condition
UP
  • Connect terminal No.7 and the negative battery terminal.
  • Connect terminal No.5 and the positive battery terminal.

 1 - 7
 12 V
OFF
 1 - 7, 2 - 7
 1 V or less
DOWN
 2 - 7
 12 V

<FRONT PASSENGER’S SWITCH (LHD)>
Switch position
 Tester connection
 Specified condition
UP
 1 - 8*, 2 - 10
 Continuity exists (2 Ω or less)
OFF
 1 - 8*, 2 - 8*
DOWN
 1 - 10, 2 - 8*
note *: Set the window lock switch to UNLOCK position.

<FRONT PASSENGER’S SWITCH (RHD)>
Switch position
 Tester connection
 Specified condition
UP
 3 - 7*, 4 - 5
 Continuity exists (2 Ω or less)
OFF
 3 - 7*, 4 - 7*
DOWN
 3 - 5, 4 - 7*
note *: Set the window lock switch to UNLOCK position.

POWER WINDOW SUB SWITCH CONTINUITY CHECK <Vehicles without safety system (Vehicles with driver’s side auto down mechanism)>

Switch position
 Tester connection
 Specified condition
UP
 4 - 5, 6 - 7
 Continuity exists (2 Ω or less)
OFF
 4 - 5, 7 - 8
DOWN
 4 - 6, 7 - 8

POWER WINDOW SWITCH CONTINUITY CHECK <Vehicles without safety system (Vehicles without driver’s side auto down mechanism)>

Switch position
 Tester connection
 Specified condition
UP
 4 - 5, 6 - 7
 Continuity exists (2 Ω or less)
OFF
 4 - 5, 7 - 8
DOWN
 4 - 6, 7 - 8

POWER WINDOW MOTOR CONTINUITY CHECK
1.Connect a battery to the motor terminals and check that the motor runs smoothly.
2.Check that the motor runs in the opposite direction when the battery is connected with the polarity reversed.
3.If a defect is found, replace the power window motor assembly.


<FRONT DOOR [Vehicles with safety system (passenger’s side), Vehicles without safety system]>
Battery connection
 Slider position

  • Connect terminal No. 1 to the negative battery terminal.
  • Connect terminal No. 4 to the positive battery terminal.

 UP

  • Connect terminal No. 4 to the negative battery terminal.
  • Connect terminal No. 1 to the positive battery terminal.

 DOWN


<REAR DOOR>
Battery connection
 Slider position

  • Connect terminal No. 2 to the negative battery terminal.
  • Connect terminal No. 1 to the positive battery terminal.

 UP

  • Connect terminal No. 1 to the negative battery terminal.
  • Connect terminal No. 2 to the positive battery terminal.

 DOWN