DISASSEMBLY AND REASSEMBLY

Disassembly steps 1. Front-three diamond mark 2. Front fog lamp assembly <Vehicles with front fog lamp> 3. Front bumper extension 4. Front bumper under grille 5. Front bumper under grille cover 6. Front bumper grille <<A>> >>A<< 7. Rivet 8. Front side air dam 9. Front bumper cover 10. Front bumper face

Use a drill (Φ 4.0 mm) to make a hole in the rivet to break it, and remove the rivet.

Use a rivet tool shown in the illustration to connect the parts with rivets by the following procedures. 1.Insert the rivet into a corresponding location. 2.Set the rivet tool at a portion A of rivet. 3.While pushing the flange surface of the rivet onto parts to be fixed with the rivet tool, press the handle of the tool. 4.Thin part of portion A of the rivet will be cut off and the parts is fixed in position.