|
Use the ETACS customisation function to confirm that "Auto fold mirror" is set to "Open
Vehicle SPD".
|
|
Q.
Is the check result normal?
|
|
Using the ETACS customisation function, set "Auto fold mirror" to "Open Vehicle
SPD" (Refer to ).
|
|
|
|
Use the M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the CAN bus normal?
|
|
Repair the CAN bus lines (Refer to GROUP 54C -
Troubleshooting -CAN Bus
Diagnostics Table ).
|
|
|
|
Check if an ETACS-related diagnosis code is set.
|
|
Q.
Is the diagnosis code set?
|
|
Diagnose the ETACS (Refer to GROUP 54A -
ETACS, Diagnosis Code Chart ).
|
|
|
|
Check if a diagnosis code is set in the engine-ECU.
|
|
Q.
Is the diagnosis code set?
|
|
Carry out troubleshooting for the engine-ECU (Refer to GROUP 13A-
Troubleshooting,
Diagnosis Code Chart ).
|
|
|
|
Check that the vehicle speed-dependent unfolding function of the door mirrors works normally.
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 -
How to Use Troubleshooting/Inspection
Service Points, -
How to Cope with Intermittent Malfunctions ).
|
|
|