REMOVAL AND INSTALLATION

caution

Before removing the front seat assembly, refer to GROUP 52B, Service Precautions

and Air Bag Module and Clock Spring

		Removal steps
	1.	Headrestraint
	·	Wiring harness connectors
>>A<<	2.	Front seat assembly

INSTALLATION SERVICE POINT

>>A<< FRONT SEAT ASSEMBLY INSTALLATION

1.Confirm that both the seat slides are locked, and then temporarily tighten all the bolts and nuts shown in the figure so that no load is applied to the front seat cushion.
2.Tighten all the bolts and nuts to the specified torque.
Tightening torque: 43 ± 8 N·m (Bolt)
Tightening torque: 30 ± 5 N·m (Nuts)