Code No.B1416
Malfunction of Inside Front Impact Sensor (LH)
|
caution |
If the diagnosis code B1416
is set to SRS-ECU, be sure to diagnose the CAN bus line.
|
|
|
note |
This front impact sensor (LH) indicates that the front impact sensor integrated in the
centre of the vehicle is defective.
|
|
|
- When the front impact sensor does not operate
- When the front impact sensor’s property is abnormal
- When the front impact sensor sends an abnormal signal
|
|
- Malfunction of CAN bus line
- Malfunction of front impact sensor
|
|
STEP 1. M.U.T.-III CAN bus diagnostics.
|
|
Use M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Go to Step 2
|
|
|
|
Repair the CAN bus line (Refer to GROUP 54C - Troubleshooting ).
|
|
|
|
STEP 2. Front impact sensor check.
|
|
(1)Check that the negative battery terminal is disconnected. If the negative battery
terminal is connected, disconnect it.
|
|
(2)A front impact sensor is checked in the following way.
- Replace the front impact sensor with new part.
|
|
(3)Connect the negative battery terminal.
|
|
(4)After erasing the diagnosis code memory, check the diagnosis code again.
|
|
(5)Disconnect the negative battery terminal.
|
|
Q.
Is the diagnosis code set?
|
|
Go to Step 3
|
|
|
|
The procedure is complete.
|
|
|
|
(1)Check that the negative battery terminal is disconnected. If the negative battery
terminal is connected, disconnect it.
|
|
(2)Replace the SRS-ECU with a new one (Refer to ).
|
|
(3)Connect the negative battery terminal.
|
|
(4)After erasing the diagnosis code memory, check the diagnosis code again.
|
|
(5)Disconnect the negative battery terminal.
|
|
Q.
Is the diagnosis code set?
|
|
Return to Step 1.
|
|
|
|
The procedure is complete.
|
|
|