|
(1)Disconnect the connector, and measure at the wiring harness side.
|
|
(2)Measure the resistance between the connector of lamp which does not illuminate
and the body earth.
- Measure the resistance between the headlamp (LH) connector
(earth terminal) and the body earth.
- Measure the resistance between the headlamp (RH) connector (earth terminal) and
the body earth.
OK: Continuity exists (2 Ω
or less)
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00 -
How
to Use Troubleshooting/Inspection Service Points -
How to Cope with Intermittent
Malfunction).
|
|
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Check that the headlamps illuminate normally.
|
|
Q.
Is the check result normal?
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00 -
How
to Use Troubleshooting/Inspection Service Points -
How to Cope with Intermittent
Malfunction).
|
|
|
|
Replace the headlamp assembly.
|
|
|