|
(1)Disconnect the connector, and measure at the wiring harness side.
|
|
(2)Check the resistance between the lamp connector and body earth.
- Measure the resistance between the rear combination lamp
(tail: LH) connector (earth terminal) and the body earth.
- Measure the resistance between the rear combination lamp (tail: RH) connector (earth
terminal) and the body earth.
OK: Continuity exists (2 Ω or less)
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Check that the tail lamps illuminate normally.
|
|
Q.
Is the check result normal?
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How
to use Troubleshooting/Inspection Service Points - How to Cope with Intermittent
Malfunction).
|
|
|
|
Replace the rear combination lamp assembly.
|
|
|