|
Check the bulb(s) of the licence plate lamp that does not illuminate.
|
|
Q.
Is the check result normal?
|
|
Replace the bulb(s) of the licence plate lamp that does not illuminate.
|
|
|
|
(1)Disconnect the connector and measure at the wiring harness side.
|
|
(2)Measure the resistance between the connector of lamp which does not illuminate
and the body earth.
- Measure the resistance between the licence plate lamp connector
(LH) connector (earth terminal) and the body earth.
- Measure the resistance between the licence plate lamp connector (RH) connector (earth
terminal) and the body earth.
OK: Continuity exists (2 Ω
or less)
|
|
Q.
Is the check result normal?
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Check that the licence plate lamp illuminates normally.
|
|
Q.
Is the check result normal?
|
|
YES) : The trouble can be an intermittent malfunction (Refer to GROUP 00 -
How
to use Troubleshooting/inspection Service Points -
How to Cope with Intermittent
Malfunction ).
|
|
|
|
Replace the socket of the defective licence plate lamp.
|
|
|