BULB REPLACEMENT

HEADLAMP BULB REPLACEMENT

caution

Don’t touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or thinner immediately and dry well, and then install it.

1.Disconnect the battery.

2.Disconnect the connector.

3.Remove bulb mounting spring to pull out bulb.
4.After bulb is replaced, properly reconnect connector.

POSITION LAMP BULB REPLACEMENT

1.Turn the position lamp socket and remove the position lamp bulb.

FRONT TURN-SIGNAL LAMP BULB REPLACEMENT

1.Turn the front turn-signal lamp socket and remove the front turn-signal lamp bulb.