PAIRING THE MOBILE PHONE (BLUETOOTH® DEVICE)

How to carry out and cancel the pairing with a mobile phone through the multivision display

By operating the multivision display by means of the touchscreen, you can carry out and cancel the pairing with a mobile phone.

note

Some mobile phone are not supported.
When a mobile phone is not powered on, the pairing cannot be carried out.

How to pair

1.Check whether the mobile phone is supported.

2.Press the "Tel" button on the menu to show the Phone Menu.

3.Press the "Setup" button on the Phone Menu to show the Setup screen.

4.Press the "Search Phone" button on the Setup screen.

5.Once "Please make sure the Bluetooth of your phone is enabled. Start searching for phones now?" appears in the display, press the "OK" button.

6.Select the mobile phone which you want to register from the menu screen, and then press it.

7.Press the "Pair" button on the screen.
8.Refer to the operating manual of the mobile phone. Then enter the specified Pin code^* which is assigned to the mobile phone.

note

^*: Initial pin code is "1234".

9.Press the "OK" button to show the Phone Menu screen.
In addition, when you use the mobile phone for the first time, the following procedure is necessary.

10.Press the "Accept" button on the screen.
11.Enter the specified Pin code (4-digit number) which is assigned to the mobile phone.
12.Press the "Pair" button on the screen.

How to cancel or reconnect the mobile phone

The mobile phone, which the pairing has been completed, will be displayed on the bottom of the Setup screen. Then select the mobile phone which you want to cancel or reconnect, and press "Disconnect" or "Connect".