DIAGNOSIS CODE CHART

caution

During troubleshooting, a diagnosis code associated with other systems may be set when the electric motor switch is turned ON with connector(s) disconnected. On the completion of troubleshooting, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all.

Diagnosis code No.	Diagnostic item		Reference page
B1706^*2	Flasher fuse blown		Refer to .
B1707^*2	Flasher open		Refer to .
B1709	ETACS ECU (EEPROM)
B1760^{*1, 2}	Coding not completed
B1761^*1	Chassis No. not programmed
B1762^*2	IOD fuse not seated fully
B1763	Lighting switch		Refer to .
B1764	Wiper switch		Refer to .
B1765^*2	ECU fuse
B2206	Chassis No. mismatch
U1000	CAN communication	OSS CAN timeout
U1100		Engine CAN timeout
U1101		T/M CAN timeout/Not equipped
U1102		ASC/TCL/ABS timeout/Not equipped
U1108		Meter CAN timeout/Not equipped
U1110		A/C CAN timeout/Not equipped
U1116		KOS CAN timeout/Not equipped
U1150^*2	Fail Info. for vehicle speed
U1500	LIN communication^*3	Column ECU LIN timeout/Not equip	Refer to GROUP 54B - Diagnosis Code Chart .
U1507		LIN transmission bit error
U1530		Column ECU LIN checksum error
U1570		No bus activity error for LIN

note

^*1: If diagnosis codes No. B1760 or B1761 is set, there may be an error with the coding data stored in the ETACS-ECU.
^*2: Does not detect historic trouble.