| caution |
- When the ETACS-ECU is replaced, chassis
number writing and coding must be performed. When
diagnosis code No.B1760 "Coding not completed"
or B1761 "Chassis No. not programmed" is set to the
ETACS-ECU, perform chassis number writing
and coding. Refer to the
"M.U.T.-III operation manual" and perform
coding.
- When the ETACS-ECU of vehicles without KOS is
replaced, the ignition key encrypted
code and the tyre pressure sensor ID of the tyre
pressure monitoring system must be registered
(if the encrypted code is not registered, the engine
cannot be started). For the details of
code registration procedure, refer to the ID
registration procedure manual.
|
)