REMOVAL AND INSTALLATION

Pre-removal and Post-installation Operation

Discharging and Recharging Refrigerant.

		A/C pressure sensor removal steps
	1.	A/C pressure sensor
	7.	O-ring
		A/C compressor discharge hose removal steps
	·	Front bumper (Refer to GROUP 51 - Front Bumper ).
	·	Air guide side panel (Refer to GROUP 42A - Loose Panel ).
<<A>>	2.	A/C compressor discharge hose
	7.	O-ring
		A/C compressor suction hose removal steps
	·	Air cleaner case (Refer to GROUP 15 - Air Cleaner).
	·	Front wheelhouse splash shield (Refer to GROUP 42A - Splash Shield).
<<A>>	3.	A/C compressor suction hose
	7.	O-ring
		A/C condenser outlet pipe removal steps
	·	Air cleaner case (Refer to GROUP 15 - Air Cleaner).
	·	Front bumper (Refer to GROUP 51 - Front Bumper ).
	·	Air guide side panel (Refer to GROUP 42A - Loose Panel ).
	·	Front wheelhouse splash shield (Refer to GROUP 42A - Splash Shield).
<<B>>	4.	Clip securing the A/C compressor suction hose to the side member
<<A>>	5.	A/C condenser outlet pipe
	7.	O-ring
		Expansion valve removal steps
	·	Air cleaner case (Refer to GROUP 15 - Air Cleaner).
<<A>>	3.	A/C compressor suction hose (heater side)
	7.	O-ring
<<A>>	5.	A/C condenser outlet pipe (heater side)
	7.	O-ring
<<A>>	6.	Expansion valve
	7.	O-ring

REMOVAL SERVICE POINTS

<<A>> HOSE, PIPE AND EXPANSION VALVE REMOVAL

caution

Use the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.

Plug the nipple of condenser, compressor, and expansion valve to prevent the entry of dust and dirt.

<<B>> CLIP SECURING A/C COMPRESSOR SUCTION HOSE TO SIDEMEMBER REMOVAL

If the A/C condenser outlet pipe must be removed individually, remove the clip securing the A/C compressor suction hose to the side member in order to create sufficient clearance.