DISASSEMBLY AND REASSEMBLY



Disassembly steps


1.
 Heater side cover

>>B<<
 2.
 Air refresher assembly


3.
 Resistor <Heater or manual A/C> or power transistor <Automatic A/C>


4.
 Blower motor


5.
 Case (Blower side)


6.
 Foot duct LH


7.
 Foot duct RH


8.
 Expansion valve


9.
 Mode selection damper control lever <Heater or manual A/C> or mode selection damper control motor <Automatic A/C>


10.
 Air mixing damper control lever <Heater or manual A/C> or air mixing damper control motor <Automatic A/C>

>>A<<
 11.
 Fin thermo sensor


12.
 Evaporator


13.
 O-ring


14.
 Heater core


15.
 Outside/inside air selection damper control motor <Automatic A/C>


16.
 Heater control vacuum aspirator <Automatic A/C>


17.
 Case (Heater side)


18.
 Wiring harness

REASSEMBLY SERVICE POINTS

>>A<< FIN THERMO SENSOR INSTALLATION

Install the fin thermo sensor at the position shown in the figure.

>>B<< AIR REFRESHER ASSEMBLY INSTALLATION

Install the air refresher in the direction shown.