|
Initialise learning values in the
MPI engine when one of the following service operations is
performed.
|
|
- At replacing engine assembly.
*
- At replacing and cleaning injector.
- At replacing and cleaning throttle body.
- At replacing detonation sensor.
|
|
caution |
To prevent damage to
M.U.T.-III, always turn the ignition switch to
the "LOCK" (OFF) position before connecting or
disconnecting M.U.T.-III.
|
1.After the ignition switch is in "LOCK"
(OFF) position, connect the M.U.T.-III to the diagnosis
connector. 2.Turn the ignition switch to the "ON"
position. 3.Select "MPI/GDI/DIESEL" from System
select Screen of the M.U.T.-III. 4.Select
"Special Function" from MPI/GDI/DIESEL
Screen. 5.Select "Learned value reset" from
Special Function Screen. 6.Select
"All learned value" from Learned value reset
Screen 7.Initialise the learning value by pressing
the "OK" button. 8.After initialising the learning
value, the learning value of MPI engine idling is necessary.
(refer to Learning Procedure for Idling in MPI Engine ).
|