|
Connect the M.U.T.-III to the
16-pin diagnosis connector, and read the diagnosis
code.
note |
- For details on how to use the
M.U.T.-III, refer to the
"M.U.T.-III operation manual."
|
1.Ensure that the ignition switch is at the
"LOCK" (OFF) position. 2.Start up the personal
computer. 3.Connect special tool V.C.I.-Lite USB
cable (MB992747/MB992748) or M.U.T.-III
USB cable (MB991827) to V.C.I.-Lite (MB992744) or V.C.I.
(MB991824) and the personal computer. 4.Connect
V.C.I.-Lite main harness A (MB992745) or M.U.T.-III main
harness A (MB991910)
to the V.C.I.-Lite or V.C.I. 5.Connect the
V.C.I.-Lite main harness A or M.U.T.-III main harness A to
the diagnosis
connector of the vehicle.
note |
When the V.C.I.-Lite is
connected to the diagnosis connector, the
V.C.I.-Lite indicator
lamp will be illuminated in a green
colour.
|
6.Turn the V.C.I. power switch to the "ON"
position. <When using the V.C.I.>
note |
When the V.C.I. is energized,
the V.C.I. indicator lamp will be illuminated in
a green
colour.
|
7.Start the M.U.T.-III system on the personal
computer and turn the ignition switch
to the "ON" position. 8.Read the diagnosis
code. 9.Disconnecting the M.U.T.-III is the
reverse of the connecting sequence, making sure
that the ignition switch is at the "LOCK" (OFF)
position.
|
|
Connect the M.U.T.-III to the
diagnosis connector, and erase the diagnosis code. The
procedure
is the same as "How to Read Diagnosis Code ."
|