|
Turn the ignition switch to the
"LOCK" (OFF) position when connecting and disconnecting the
connectors. Turn the ignition switch to "ON" when measuring,
unless there are instructions to the contrary.
|
![](../../../img/00/AC105597AB00ENG.png)
|
Use the special tools such as test
harness, harness connector or check harness.
|
![](../../../img/00/AC105598AH00ENG.png)
|
Inspect by inserting a test probe
from the harness side. If the connector is too small to
insert a test probe (e.g. control unit connector), do not
insert it forcibly. Use special tool extra fine probe
(MB992006).
|
![](../../../img/00/AC105599AB00ENG.png)
|
Use inspection harness (MB991219)
of special tool harness set (MB991223).
|
![](../../../img/00/AC105600AA00ENG.png)
|
Touch the pin directly with the
test bar.
|