CONFIGURATION DIAGRAMS


Connector symbol
 Name
Reference page
 Description of change
A
 ENGINE COMPARTMENT
 4B1 (LHD)

  • Due to the addition of vehicles with daytime running lamp, daytime running lamp relay connector (A-10X) has been added.

  • Due to the change in the headlamp assembly, the number of the headlamp assembly (LH, RH) (A-27, 37) connector terminals has been reduced from 6 to 8.

  • The number of the front wiring harness and fog lamp wiring harness combination connector (A-33) terminals has been changed from 4 to 2.

  • The CVT control relay (A-07X) has been discontinued.


4B1 (RHD)


6B3

  • Due to the addition of vehicles with daytime running lamp, daytime running lamp relay connector (A-10X) has been added.

  • Due to the change in the headlamp assembly, the number of the headlamp assembly (LH, RH) (A-27, 37) connector terminals has been reduced from 6 to 8.

  • The number of the front wiring harness and fog lamp wiring harness combination connector (A-33) terminals has been changed from 4 to 2.


4N1

  • Due to the introduction of 4N1 engine, a new configuration diagram has been established.
B
 ENGINE AND TRANSMISSION
 4B1

  • Due to the change of the CVT assembly, turbine speed sensor (B-149) has been added.


4N1

  • Due to the introduction of 4N1 engine, a new configuration diagram has been established.
C
 INSTRUMENT PANEL
 LHD


  • Due to the introduction of super all wheel control (S-AWC), the connectors below have been added.

    • "4WD switch (C-14)" has been renamed as "4WD switch <Vehicles with electronically controlled 4WD> or S-AWC drive mode-selector <Vehicles with S-AWC>."

    • An AWC-ECU (C-234) has been added.

  • The number of J/C (CAN3, CAN1) (C-27, 29) connector terminals and the connector colour have been changed from "22-GR" to "18".

  • Due to the adoption of MMCS, the following connectors have been added.

    • Multivision display (C-104, 106, 108, 110)

    • CAN box unit <Vehicles with MMCS> (C-116)

  • Due to the introduction of lane departure warning system (LDW), LDW switch (C-133) has been added.

  • Due to the adoption of the EPS-ECU integrated with the motor, the following connectors have been changed or added.

    • The terminal numbers of EPS-ECU (C-218) connector has been changed from 4 to 8.

    • Front wiring harness and EPS sub wiring harness combination (C-246, 247) has been added.

  • PTC heater <4N1> connectors (C-230, 231) have been added as vehicles with 4N1 engine have been introduced.


RHD


  • The number of J/C (CAN3, CAN1, CAN4) (C-27, 29, 34) connector terminals and the connector colour has been changed from "22-RG" to "18".

  • Due to the adoption of the EPS-ECU integrated with the motor, the following connectors have been changed or added.

    • The terminal numbers of EPS-ECU (C-218) connector has been changed from 4 to 8.

    • Front wiring harness and EPS sub wiring harness combination (C-246, 247) has been added.

D
 FLOOR
 LHD


  • The terminal number and colour of floor wiring harness and tailgate wiring harness (LH) combination connector <Vehicles with electric tailgate> (D-112) have been changed from "15-L" to "14".

  • Due to the introduction of super all wheel control (S-AWC), "Electronic control coupling solenoid <4WD> (D-116)" has been renamed as "Electronic control coupling solenoid <Vehicles with electronically controlled 4WD> or electronic control coupling solenoid (centre) <Vehicles with S-AWC>".

  • No connection (D-138, 139) has been added.


RHD

  • The terminal number and colour of floor wiring harness and tailgate wiring harness (LH) combination connector <Vehicles with electric tailgate> (D-112) have been changed from "15-L" to "14".

  • No connection (D-138, 139) has been added.
E
 ROOF

  • Due to the introduction of lane departure warning system (LDW), LDW-ECU (E-17) has been added.

  • Inside rear view mirror assembly connector (E-19) has been added due to the introduction of automatic anti-dazzling mirrors.
G
 TAILGATE

  • The colour of back-up lamp (LH, RH) connector (G-09, 25) has been changed from "B" to "GR."

  • The following connectors have been added.

    • Rear fog lamp (G-16)

    • Tail lamp (RH, LH) (G-26, 28)

    • Rear end wiring harness and rear bumper wiring harness combination <Vehicles without reversing sensor system> (G-27)

  • "ear end wiring harness and rear bumper wiring harness combination (G-18)"has been renamed as "Rear end wiring harness and rear bumper wiring harness combination <Vehicles with reversing sensor system>."