![](../../../img/11/ACB05017AB00ENG.png)
|
1.Before inspection, set the
vehicle to the pre-inspection condition. 2.Turn
the ignition switch to "LOCK" (OFF)
position. 3.Connect the M.U.T.-III to the
diagnosis connector.
|
![](../../../img/11/AK603283AB00ENG.png)
|
4.Disconnect the ventilation
hose from the positive crankcase ventilation (PCV) valve,
and connect a vacuum gauge to the ventilation
hose. 5.Plug the PCV valve. 6.Start the
engine and check that idle speed is within the standard
valve. Standard value: 650 ± 100
r/min 7.Check the intake manifold
vacuum. Limit: Minimum 60
kPa 8.Turn the ignition switch to the
"LOCK" (OFF) position. 9.Remove the vacuum gauge
and then connect the vacuum hose. 10.Disconnect
the M.U.T.-III.
|