|
1.Set the vehicle to the
pre-inspection condition.
|
|
2.Turn the ignition switch
to the "LOCK" (OFF) position and then connect the M.U.T.-III
to the diagnosis connector (Refer to GROUP 00 -
Precautions Before Service - M.U.T.-III
Sub Assembly). 3.Start the engine, and let it run
at idle. 4.Check the idle speed. Select the item
No. 2 of the Data List, Engine Revolution, and
take a reading of the idle speed. Standard
value: 650 ± 50 r/min 5.If the idle
speed is not within the standard value, inspect the diesel
system (Refer
to GROUP 13D - Troubleshooting - Inspection
Chart for Trouble Symptoms ).
|