SPECIAL TOOLS


Tool
 Number
 Name
 Use



  1. MB992744
  2. MB992745
  3. MB992746
  4. MB992747
  5. MB992748
  1. Vehicle communication interface-Lite (V.C.I.-Lite)
  2. V.C.I.-Lite main harness A (for vehicles with CAN communication)
  3. V.C.I.-Lite main harness B (for vehicles without CAN communication)
  4. V.C.I.-Lite USB cable short
  5. V.C.I.-Lite USB cable long
  • Checking the ignition timing
  • Checking the idle speed


MB991955

    a: MB991824
    b: MB991827
    c: MB991910
    d: MB991911
    e: MB991825
    f: MB991826
 M.U.T.-III sub assembly

    a: Vehicle communication interface (V. C. I.)
    b: M.U.T.-III USB cable
    c: M.U.T.-III main harness A (Vehicles with CAN communication system)
    d: M.U.T.-III main harness B (Vehicles without CAN communication system)
    e: M.U.T.-III adapter harness
    f: M.U.T.-III trigger harness
caution For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.

  • Ignition timing check
  • Curb idle speed check
  • Idle mixture check
  • Erasing the diagnosis code


MB990767
 Front hub and flange yoke holder
 Holding the crankshaft pulley and camshaft sprocket


MD998719
 Pin


MD998713
 Camshaft oil seal installer
 Press-in of the camshaft oil seal


MD998777
 Camshaft oil seal installer adapter
 Press-fitting the camshaft oil seal (left bank)


MD998443
 Auto-lash adjuster holder
 Holding the auto-lash adjuster


MD998772
 Valve spring compressor
 Compressing valve spring


MB992182
 Valve stem seal installer
 Valve stem seal installation


MD998727
 Oil pan FIPG cutter
 Engine lower oil pan removal


MD998382
 Crankshaft front oil seal installer
 Press-in of the crankshaft front oil seal


MD998781
 Flywheel stopper
 Securing the drive plate


MB992075
 Handle
 Crankshaft rear oil seal installation


MB992183
 Crankshaft rear oil seal installer


MB991614
 Angle gauge
 Cylinder head bolt installation


MD998716
 Crankshaft wrench
 Rotating the crankshaft when installing the timing belt


MB992208
 Engine hanger plate A
 Support of engine assembly
note Engine hanger balancer (MB991454) is a part of the engine hanger assembly (MB991453).


MB991454
 Engine hanger balancer


MB991895
 Engine hanger


MB991928

    a: MB991929
    b: MB991930
    c: MB991931
    d: MB991932
    e: MB991933
    f: MB991934
 Engine hanger

    a: Joint (50) × 2
    b: Joint (90) × 2
    c: Joint (140) × 2
    d: Foot (standard) × 4
    e: Foot (short) × 2
    f: Chain and hook assembly