REMOVAL AND INSTALLATION

		Removal steps
	1.	EGR pipe (Vehicles with EGR system)
>>E<<	2.	EGR pipe gasket (Vehicles with EGR system)
	3.	EGR pipe gasket (Vehicles with EGR system)
	4.	Harness bracket
	5.	Throttle body
>>D<<	6.	Throttle body gasket
	7.	Vacuum hose
	8.	Solenoid valve
	9.	O-ring
	10.	Boost sensor
	11.	O-ring
	12.	Purge hose
>>C<<	13.	Throttle body stay
	14.	Engine hanger, right
>>B<<	15.	Air inlet plenum stay, front
>>A<<	16.	Air intake plenum stay, rear
	17.	Air intake plenum
	18.	Air intake plenum gasket

INSTALLATION SERVICE POINTS

>>A<< AIR INTAKE PLENUM STAY, REAR INSTALLATION

1.After temporarily tightening the rear air intake plenum stay with the installation bolts, check that the inlet manifold fastens securely to the cylinder head.
2.Tighten the rear air intake plenum stay to the specified torque.
Tightening torque: 23 ± 6 N·m

>>B<< AIR INTAKE PLENUM STAY, FRONT INSTALLATION

1.After temporarily tightening the front air intake plenum stay with the installation bolts, check that the inlet manifold fastens securely to the cylinder head.
2.Tighten the front air intake plenum stay to the specified torque.
Tightening torque: 23 ± 6 N·m

>>C<< THROTTLE BODY STAY INSTALLATION

1.After temporarily tightening the throttle body stay with the installation bolts, check that the throttle body fastens securely to the cylinder head.
2.Tighten the throttle body stay to the specified torque.
Tightening torque: 23 ± 6 N·m

>>D<< THROTTLE BODY GASKET INSTALLATION

Install the throttle body gasket so that the tab is positioned as shown in the illustration.

>>E<< EGR PIPE GASKET INSTALLATION

Install the EGR pipe gasket so that the tab is positioned as shown in the illustration.