|
1.Check engine oil level
(Refer to ).
|
|
2.Remove the engine oil
pressure switch (Refer to )
<4B1>.
|
|
3.Remove the engine oil
pressure switch (Refer to )
<6B3>. 4.Install the oil pressure
gauge.
note |
Use an adapter of PT 1/8
thread.
|
5.Run the engine to warm
it. 6.After the engine has been warmed up, check
that oil pressure is within the standard
value. Standard value:
At idle:
29 kPa or more At 3,500 r/min: 294 - 686
kPa
7.Remove the oil pressure
gauge. 8.Install the engine oil pressure switch
(Refer to )
<4B1>. 9.Install the engine oil pressure
switch (Refer to )
<6B3>.
|