| note | This recommended tool is a
component of the screw extractor set
(MB992678). |
| 1.Remove the engine oil
filter. (Refer to engine oil filter replacement.) |
|
2.Remove the oil filter stud
using the screw extractor (Recommended tool: MB992684), or
equivalent.
|
 |
3.Using the oil filter stud
setter (Special tool: MB992676), install the new oil filter
stud and tighten it to the specified
torque. Tightening torque: 49 ± 5 N·m 4.Install the engine oil filter. (Refer to engine oil filter replacement.) |