![](../../../img/13/AKC00020AB00ENG.png)
|
1.Disconnect the inlet oil
feeder control valve connector.
caution |
To prevent the coil from
burning, keep the duration of the voltage
application as short as possible.
|
2.Make sure that the inlet oil feeder control
valve generates a tick sound when the battery voltage is
applied between the connector terminals at the inlet oil
feeder control valve side.
|
|
1.Disconnect the inlet oil
feeder control valve connector.
|
|
2.Measure the resistance
between the terminals of the connector at the inlet oil
feeder control valve.
|
|
Standard value: 6.9
- 7.9 Ω (at 20°C)
|
|
3.If the resistance deviates
from the standard value, replace inlet oil feeder control
valve.
|