| Item No. |
Inspection Item |
Drive content |
Inspection condition |
Normal condition |
|
| 1 |
Injectors |
Specified injector is stopped |
Engine: warm up, idle (cut the fuel supply to each injector in turn and check cylinders which don’t affect idling.) |
Idle condition is changed by stopping selected cylinder: this can cause an unstable condition and the engine may stall. |
|
| 9 |
Fuel pump |
Drive fuel pump to circulate fuel |
|
Operating noise audible |
|
| 10 |
Purge control solenoid valve |
Switch solenoid valve from OFF to ON |
Ignition switch: "ON" |
When the valve is actuated, operating noise is audible |
|
| 14 |
Cooling fan motor |
Actuate the fan motor |
Ignition switch: "ON" |
Fan motor rotates at high speed |
|
| 16 |
A/C compressor relay |
Switch the A/C compressor relay from OFF to ON |
Ignition switch: "ON" |
The operating sound of A/C compressor is audible |
|
| 17 |
Inlet oil feeder control valve |
Switch the inlet oil feeder control valve from OFF to ON |
Ignition switch: "ON" |
When the valve is actuated, operating noise is audible |
|