|
- Remove the spark plug and install it to the ignition coil.
- Connect the ignition coil connector.
- Remove all injector connector.
- At the engine start, check each spark plug produces a spark.
|
|
Q.
Is the check result normal?
|
|
- Spark plug check (Refer to GROUP 16 - Ignition System - On-vehicle Service - Spark Plug Check and Cleaning ).
|
|
Q.
Is the check result normal?
|
|
Check Inspection Procedure - ignition circuit system (Refer to ).
|
|
|
|
- No. 5 injector check (Refer to ).
|
|
Q.
Is the check result normal?
|
|
Replace the No. 5 injector.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
- Check the compression pressure (Refer to GROUP 11C - On-vehicle Service - Compression Pressure Check ).
|
|
Q.
Is the check result normal?
|
|
- Reconfirmation of diagnosis code.
|
|
Q.
Is diagnosis code stored?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|