|
- Using M.U.T.-III, perform CAN bus line diagnosis.
|
|
Q.
Is the check result normal?
|
|
Correct CAN bus line (Refer to GROUP 54C - Troubleshooting - Can Bus Diagnostics Table ), and then go to Step 3.
|
|
|
|
- Reconfirm whether the diagnosis codes are set in the engine-ECU.
|
|
- Erase the diagnosis codes being set.
- Ignition switch: "LOCK" (OFF) to ON
- Confirm whether the diagnosis codes are set.
|
|
Q.
Are the diagnosis codes set?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions).
|
|
|
|
- Reconfirm whether the diagnosis codes are set in the engine-ECU.
|
|
- Erase the diagnosis codes being set.
- Ignition switch: "LOCK" (OFF) to ON
- Confirm whether the diagnosis codes are set.
|
|
Q.
Are the diagnosis codes set?
|