|
- Using M.U.T.-III, perform CAN bus line diagnosis.
|
|
Q.
Is the check result normal?
|
|
Correct CAN bus line (Refer to GROUP 54C - Troubleshooting - CAN
Bus Diagnostics Table ), and then go to Step 4.
|
|
|
|
- Confirm whether the diagnosis codes are set in the ASC-ECU.
|
|
Q.
Is the diagnosis code set?
|
|
Perform the troubleshooting of ASC system (Refer to GROUP 35C - Troubleshooting - Diagnosis
Code Chart ).
|
|
|
|
Check that the other ECU performing CAN communication with ASC-ECU sets diagnosis code
No. U0121 [Refer to GROUP 54C - CAN communication-related Diagnosis Code Table ].
|
|
Q.
Is the diagnosis code set?
|
|
- Reconfirm whether the diagnosis codes are set in the engine-ECU
|
|
- Erase the diagnosis codes being set.
- Ignition switch: "LOCK" (OFF) to ON
- Confirm whether the diagnosis codes are set.
|
|
Q.
Is the diagnosis code set?
|
|
Intermittent malfunction in CAN bus line between engine-ECU and ASC-ECU (Refer
to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to
Cope with Intermittent Malfunction).
|
|
|
|
- After replacing the ASC-ECU, re-check the diagnosis code set.
|
|
Q.
Is the diagnosis code set?
|