|
1.Remove the second seat
assembly (Refer to GROUP 52A - Second Seat Assembly ), and turn
up the floor carpet.
|
|
2.Remove the floor
inspection lid (RH).
|
|
3.Disconnect the fuel gauge
unit connector.
|
|
4.
caution |
Pay attention not to damage
the gauge unit and the float of fuel gauge unit
when withdrawing it from the service
hole.
|
Remove the fuel gauge unit mounting nuts, and remove
the fuel gauge unit from service hole. 5.Replace
the fuel gauge unit gasket with a new one.
|
|
6.
caution |
Pay attention not to damage
the gauge unit and the float of fuel gauge unit
when installing it to the fuel tank through the
service hole.
|
Install the fuel gauge unit to the fuel tank through
the service hole, and tighten the mounting nuts to the
specified torque. Tightening torque: 2.5
± 0.4 N·m
|
|
7.Connect the fuel gauge
unit connector. 8.Check the fuel leak of fuel tank
(Refer to ).
|
|
9.Install the floor
inspection lid (RH). 10.Return the floor carpet to
the original condition and install the second seat assembly
(Refer to GROUP 52A - Second Seat Assembly ).
|