|
1.
warning |
When pressure testing the
cooling system, slowly release cooling system
pressure
to avoid getting burned by hot coolant.
|
caution |
- Be sure to completely clean
away any moisture from the places
checked.
- When the tester is taken out, be careful
not to spill any coolant.
- Be careful when installing and removing
the tester and when testing not to
deform
the filler neck of the
radiator.
|
Check that the coolant level is up to the filler
neck. Install a radiator tester and apply
160 kPa pressure, and then check for leakage from the
radiator hose or connections. 2.If there is
leakage, repair or replace the appropriate part.
|