REMOVAL AND INSTALLATION <6B3>



Removal steps


1.
 Air cleaner intake duct


2.
 Breather hose connection

>>C<<
 3.
 Nipple

>>B<<
 4.
 Air cleaner intake hose


5.
 Air flow sensor connector connection

>>A<<
 6.
 Air flow sensor


7.
 Air cleaner assembly


8.
 Air cleaner cover


9.
 Air cleaner element


10.
 Air cleaner body


·
 Engine-ECU (Refer to GROUP 13B - Engine-ECU ).


11.
 Air cleaner bracket

INSTALLATION SERVICE POINTS

>>A<< AIR FLOW SENSOR INSTALLATION
1.Install the air flow sensor to the air cleaner cover with care not to damage the O-ring.
2.
caution Do not over-tighten. If the mounting screw is over-tightened, the air cleaner cover can be damaged.
Tighten the mounting screws to the specified torque.
Tightening torque: 1.5 ± 0.3 N·m

>>B<< AIR CLEANER INTAKE HOSE INSTALLATION


1.Install the hose clamps with the tightening bolt at the position shown in the figure.
2.Check that the tip of tightening bolt does not interfere with the surrounding components.

>>C<< NIPPLE INSTALLATION
caution Securely install the nipple to the air cleaner intake hose.