|
An air pipe is removed in the state
by which connection part was lifted in the arrow
direction.
|
|
Put mating marks on the air hose,
hose clamp, throttle body and intercooler assembly,
and remove them.
|
|
1.Insert hose to stopper end
and not overlap with stopper. 2.Place the hose
clamp as shown in the figure so that it does not overlap
with the bulge
and the stopper end. Then, set the hose clamp 5 ± 1 mm
away from the stopper.
|
|
3.
caution |
Do not use an electric
screwdriver or air tool. Manually tighten
the hose clamp.
|
Align the mating marks on the air hose, hose clamp,
throttle body and intercooler assembly.
Then, tighten the hose clamp to the specified
torque. Tightening torque: 6.0 ± 1.0
N·m
|