|
1.Remove the air cleaner
assembly, air intake pipe, fuel pipe and heater hose.
|
|
2.
caution |
Remove a careful catalytic
converter assembly so as not
to damage a fuel filter assembly.
|
Remove the catalytic converter mounting nut, and
pull out the catalytic converter assembly
towards the upper side of the engine compartment.
|
|
Use a drill (6.0 mm) to make a hole
in the rivet to break it, and then remove the
rivet.
|
|
Use a rivet tool shown in the
illustration to connect the parts with rivets by the
following
procedures. 1.Insert the rivet into a
corresponding location. 2.Set the rivet tool at a
portion A of rivet. 3.While pushing the flange
surface of the rivet onto parts to be fixed with the rivet
tool, press the handle of the tool. 4.Thin part of
portion A of the rivet will be cut off and the parts is
fixed in position.
|