|
1.Disconnect the No. 1
exhaust gas temperature sensor connector.
|
|
2.Measure the resistance
between terminal No. 1 and No. 2. Standard
value: 75 - 190 kΩ (at
20°C) 3.Remove the No. 1 exhaust gas
temperature sensor. 4.Measure the resistance while
heating the sensor using a hair drier. Normal
condition:
|
Temperature
(°C)
|
Resistance
(kΩ)
|
Higher
|
Smaller
|
|
5.If the value deviates from the
standard value or the resistance remains unchanged,
replace the No. 1 exhaust gas temperature
sensor. 6.Install the No. 1 exhaust gas
temperature sensor and tighten it to the specified
torque. Tightening torque: 30 ± 5
N·m
|