|
1.Put on the parking
brake.
|
|
2.Move the selector lever to
every range and check that the lever moves smoothly with
secure feel of engagement. 3.Make sure that the
engine starts when the selector lever is in the "N" or "P"
range, and does not start when the selector lever is in
other range. 4.Start the engine. Release the
parking brake. 5.Make sure that the vehicle moves
forward when the selector lever is moved to "D" range, or to
the "L" range. Also make sure that the vehicle moves
backward when the selector lever is moved from the "N" to
"R" range. 6.Stop the engine. 7.Turn ON
the ignition switch, and move the selector lever from the P
to R range. Check that the backup lamp comes on at this
time.
note |
Since the vehicle is equipped
with the A/T wrong-operation preventive device,
the selector lever cannot be moved out of the
"P" position without depressing the brake pedal
after turning "ON" the ignition switch.
|
|