|
1.Disconnect the A/T
control solenoid valve assembly connector.
|
|
2.Measure the resistance
between the sensor-side connector terminal No. 2 and 3 of
the A/T control solenoid valve assembly
connector. Standard value:
|
Fluid
temperature
°C
|
Resistance
kΩ
|
10
|
Approx.
6.62
|
25
|
Approx.
3.51
|
80
|
Approx.
0.55
|
110
|
Approx.
0.25
|
|
note |
In the information screen on
the multi-information display, the fluid
temperature warning comes on when the A/T
fluid temperature is approximately 140°C
or higher, and automatically goes out when the
A/T fluid temperature dropped below
approximately 135°C.
|
3.
caution |
The A/T fluid
temperature sensor cannot be removed or replaced
as a single unit. When the A/T fluid
temperature sensor needs to be replaced, replace
the valve body assembly.
|
When the resistance of the A/T fluid
temperature sensor is outside the standard value, and the
fluid temperature warning comes on/goes out at other
than the specified temperatures, replace the valve body
assembly and the harness.
|