|
1.Remove the A/T
control relay.
|
|
2.Use jumper wires to
connect A/T control relay terminal No.1 to the
negative battery
terminal and terminal No.2 to the positive battery
terminal.
3.Check for continuity between A/T
control relay terminals No.3 and No.4 when
the jumper wires are connected to and disconnected from the
battery.
|
|
Jumper
wire
|
Continuity between
terminals No.3 and
No.4
|
Connected
|
Continuity exists
(2Ω or less)
|
Disconnected
|
No continuity
|
|
4.If there is any problem with the A/T
control relay, replace it.
|