|
1.Disconnect the A/T
control solenoid valve assembly
connector. 2.Measure the resistance between the
terminals of the applicable solenoid valves and terminal
No.13. Standard value:
|
Terminal
No.
|
Applicable
solenoid valve
|
Resistance
value Ω
|
1
|
Low clutch linear
solenoid valve
|
Approximately 5.3
{A/T fluid
temperature:
20°C}
|
4
|
Lock-up and low
reverse brake linear solenoid
valve
|
6
|
2-6 brake linear
solenoid valve
|
9
|
Line pressure
linear solenoid valve
|
14
|
3-5 reverse clutch
linear solenoid valve
|
19
|
High clutch linear
solenoid valve
|
17
|
Low-reverse brake
shift solenoid valve
|
Approximately 28
{A/T fluid
temperature:
20°C}
|
22
|
Low clutch shift
solenoid valve
|
|
3.When the resistance is within the
standard value, check the power supply and the earth
circuits. 4.
caution |
Each solenoid valve cannot be
removed or replaced as a single unit. When
replacement of any one of the solenoid valves is
necessary, replace the valve body
assembly.
|
When the resistance is outside the standard value,
replace the valve body assembly and the harness.
|